Butterfly valve wafer type - L 32.N 102(3)-410 PN 10



Installation
Butterfly valve can be installed either into horizontal, vertical or inclined pipeline. Medium flow must be as per the arrow on the body and the shaft axis must be in horizontal position. During the installation the bolts type in the shaft area must be considered. It is clear from the table when the stud bolts shall be used. When actuator or gearbox is to be connected it is very important
to adjust the open-close limits of the disc.
Application
Shut-off valve used mainly for water, steam,
air, natural gas, coke-oven gas, oil products,
diesel, petrol, oil etc. for working pressures
and temperatures:


Maximal temperature of working medium
depends on the material of the sealing and can
be
from -20°C up to +80°C......NBR
from -20°C up to +120°C....VITON

Technical description
Revolving disc is fixed with eccentricity in
the body and is fixed to the shaft and pin. Pin
and shaft are placed in self-lubricating sliding
bearings. Pin is sealed by the flat asbestos-free
gasket and shaft by "O"-ring. Seat is made of
stainless steel. Shaped rubber ring is pushed in
the seat during closing. Rubber ring is secured
to the disc by the thrust ring which allows the
adjusting of prestress against the seat.

Connection
Wafer connection is as per DIN 2501, resp.
ČSN 131060. Face-to-face dimensions as per
ČSN EN 558-1, line 14. Basic connecting
dimensions are given in the table.

Materials
Body, disc wrought carbon steel
Seat austenitic stainless steel
Shaft, pin stainless steel
Sealing ring NBR or VITON
Shaft sealing NBR or VITON
Pin sealing asbestos-free

Testing
Swing check valve is tested as per DIN 3230.

Control
Valve can be controlled by the gearbox with handwheel or multi-turn electric actuator. Another kind can be remote control from the
stand. Smaller sizes can be controlled directly by the quarter-turn actuator. Further possibilities of control are pneumatic or
hydraulic cylinders. That kinds shall be always discussed with the producer.


Go to
WWW Intersigma Indusrial a.s.