Valve-type suction basket - M 51 010-610 PN 10



Application
End fitting for the vertical suction pipe for
pumping clean or turbid non-aggressive
liquids without hard mechanical particles at
service temperature up to 70°C. It prevents the
unwanted escape of columns of liquid from
the suction pipe when the pump is stopped.

Technical description
The basket consist of a body, valve, seat plate
and filter screen. The surface area in the
basket holes is 2.5 times the cross-sectional
area of the pipe to which the basket is fitted.
Valve lift is limited by a rib in the body.

Connecting and face-to-end dimensions
Face-to-end dimensions are given in table
below.
Flange connecting dimensions as per DIN
2501 and ČSN 13 1060 and 13 1061.

Material
Body, valve grey cast iron (GG-20)
Seat plate grey cast iron (GG-20)
Seat in seat plate brass
Valve seat rubber
Filter screen carbon steel
(perforated sheet metal)

Testing
The suction basket is tested as per DIN 3230,
ČSN 13 3060

Installation
The suction basket must be installed
vertically.

 


Go to
WWW Intersigma Indusrial a.s.