Application
Automatic fitting which releases condensate
from low-pressure central heating systems for
water and steam, for service temperatures and
pressures:
Technical description
Condensate is released by a thermostat with a
special filling, to which a conical disc is
attached. The inlet end has a union nut
coupling for connection to piping. The body
has two threaded necks, allowing connections
to horizontal or vertical piping. The neck, if
not used, is closed with a plug.
Connecting and end-to-end dimensions
Connecting and end-to-end dimensions are
given in the table below.
Material
Body, coupling grey cast iron (GG-20)
Union nut grey cast iron (GG-20)
Seat, conical disc brass
Thermostat tombak (CuZn20)
Testing
The steam trap is tested as per DIN 3230,
ČSN 13 3060, part 2.
Installation
The steam trap valve can be installed in
horizontal or vertical piping.
Operation
Automatic, depending on service conditions.
|
