Application
Stands are intended for control of sewage gate
valves.
Technical description
Motorized driving units M 50/80 are used for
sewage gate valves from DN 700, which
actuate the gate directly and is put on the
Y3531 stand.
Installation
Stand for control of sewage gate valve must
be installed and centered in the pit before
setting in concrete so as the gate base (or
extension bar) do not get stuck when moving.
Note
Hmin - minimum depth, when the sewage
gate valves can be still fully open.
Weight is valid for Hmin.
Weights are informative only and for
configuration of Hmin including sewage gate
valve.
X - optional center bearing location, 1ks/2,5 m
Electric motor weight Mo 50/80=113 kg
|
