Stand with motorized driving unit for sewage gate valve
S 60 003-601 Y 3550


 

Application
The stands are for intended for control of
sewage gate valves.

Technical description
Motorized driving units M 50/80 are used for
sewage gate valves from DN 700, which
actuate the gate directly and is put on the stage
Y3531.

Installation
Stand for actuating sewage gate valves must
be installed and centered in the shaft before
setting in concrete in the shaft thus the gate
base (or extension bar) must not thwart when
moving.

Note
Hmin - minimum depth, when the sewage
gate valve can be as yet fully open.
Weight is valid for Hmin.
Weights are informative only and for
configuration of Hmin including sewage gate
valve.

X - optional center bearing location, 1pc/2,5 m 

Electric motor weight Mo 25/32=52 kg


Go to
WWW Intersigma Indusrial a.s.