|
Application
It is used for motor-operated actuation of
valves and fittings. Stand "A" is for valves
without by passes, which are set under ground
or above ground. Stand "B" is for valves with
or without bypasses, which are set under
ground or above ground. Maximum working
temperature is up to 55°C, relative humidity is
up to 80%. Stand are actuated by handwheels.
Connecting
Connecting dimensions are given in the table
below.
Material
Base flange grey cast iron
Stand body carbon steel
Installation
Stand can be installed to horizontal or vertical
position. Connection of stand with actuated
valve is done with accessories for remote
control.
|