Application
It is used as water direct-reading instrument
for pressure and non-pressure tanks. This
level indicator is for service pressure up to
PN 16 and temperatures up to 200°C. The
indicator must not be used for toxic,
aggressive or crystallic substances.
Technical description
Level indicator has upper and inferior head,
level indicator glass tube with 20 mm outside
diameter. Arms have access eyes, which are
sealed with cocks, when in service. Level
indicator tube is from special glass and is
packed with asbestos jointing in the arms.
Inferior head has drain plug. Max. centre to
centre distance is H=1500 mm. R00.4 are
used for adapter connection, when the
distance is greater.
Connecting and face-to-face dimensions
Connecting and face-to-face dimensions are
given in the table below.
Material
Body, arms, nuts stainless steel
Stem, plug, sleeves stainless steel
Adapter body grey cast iron
Installation
Level indicator is installed vertically or to a
sloping position with the control valve in low
position.
|
